Product Details
DOUBLE CARCAS SUBMARINE HOSE
|
|
520210 DCS
End Reinforced without Float Collars Hose
(ie. Under buoy)
|
|
|
520211 DCS
End Reinforced with Float Collars Hose
(ie. Under buoy)
|
|
|
520220 DCS
Mainline without Float Collars Hose
|
|
|
520221 DCS
Mainline with Float Collars Hose
|
|
|
520230 DCS
End Reinforced without Float Collars Hose
(ie. off PLEM)
|
|
|
520231 DCS
End Reinforced with Float Collars Hose
(ie. off PLEM)
|
|
|
520240 DCS
Both Ends Reinforced without Float Collars Hose
|
|
|
520250 DCS
Reducing Hose without Float Collars Hose
|
|
|
520260 DCS
Tail Hose without Float Collars Hose
|
|
|
520270 DCS
Tanker Rail Hose
|
Notes:
1) PLEM: Pipe Line End Manifold
Nominal Bore |
6"=150mm, 8"=200mm, 10"=250mm, 12"=300mm, 16"=400mm, 20"=500mm, 24"=600mm |
Length |
30'=9.1m, 35'=10.7m, 40'=12.2m |
Construction & Material |
1) Inner Lining - NBR (Vulcanized seamless tube)
2) Main Carcass - Polyester cord and steel wire
3) Flotation material - Closed cell foam (Only for floating hose)
4) Outer cover - Fabric reinforced elastomer cover
|
Flange |
ASTM A-1 05 or equivalent, Class 150 or 300, galvanizing |
Nipple |
ASTM 1-285 C or equivalent, galvanizing |
Rated Working Pressure (RWP) |
1) Primary Carcass: 15Bar=217.5psi, 19Bar=275.5psi, 21Bar=304.5psi
2) Secondary Carcass: 15Bar=217.5psi, 19Bar=275.5psi, 21Bar=304.5psi
|
Min. Burst Pressure |
1) Primary Carcass: 75Bar=1087.5psi, 95Bar=1377.5psi, 105Bar=1522.5psi
2) Secondary Carcass: 30Bar=435psi, 38Bar=551psi, 42Bar=609psi
|
Flow Velocity |
Max. 21m/s(or the purchaser have specified) |
Fluid |
Crude oil and liquid petroleum products, max.60% aromatic content |
Temperature Range |
1) Fluid temperature -20℃ to 82℃
2) Ambient temperature -29℃ to 52℃
|
Min. Bend Radius |
1) Submarine hose - 4×hose nominal bore diameter
2) Floating hose - 6×hose nominal bore diameter
|
Electrical Continuity |
Electrical continuous or Discontinuous. |
Leak Detection |
Pressure compensated leak detection system for Floating, Submarine & Catenary applications. |
Applicable Standards |
OCIMF GUIDE 5th Edition - GMPHOM 2009 |
Hose Lifting Instruction
At least 3 point lifting is required, 5 point lifting is more favorable.
http://www.jsdymarine.com/