2t/H Syrup Filter Stainless Steel Ss316L Filter (ACE-WKG-C8)
Application:
Filter series is a kind of sanitary filter, mainly used for filtering liquid with solid particles, protect the pump,
instruments and other devices to work properly. Because of its reasonable structured, flitration and seal
ability strong, pressure loss of small and easy maintenance and other characteristics, widely used in wine,
beverage, pharmaceutical, etc.
Cartridge filter housings are available in a wide range of configurations and materials. They are a great
option for fine filtration because they are capable of filtering down to 0.02 micron. The size of cartridge
and number needed in a housing can be determined based on the flow rate and the size of particulates
being filtered.
We can help you select the right system based on your specific needs. We offer a wide range of cartridge
housings in stock that are available for immediate shipment. Current inventory includes single 10" cartridge
housings all the way up to 51pcs 40" cartridge housings. Housings can also be custom built to your precise needs.
For information, availability, engineering drawings, or to purchase: please contact us at +86 186 2683 5909 or
How Cartridge Filtration WorksUnfiltered liquid enters the filter housing from the side or top and liquid fills the interior of the filter housing.
Liquid flows thru the cartridge filter from the outside in. Particles are trapped while the processed liquid
moves to the center of the filtration system and flows out from the bottom of the filter. O-Rings are used
to create a positive seal between the lid and housing. Multi cartridge systems function the same way.
Working principle
When with larger solid particles or impurity of media through the filter, these larger solid particles and impurutues
will be filter inside, thus preventing the solid particles and impurities into subsequent pipes, filered medium
criterion by export outflow, achieve the requirement.
Standard Design
DEYI can provide Y type filter, welding and thread, clamp etc connection mode through filters. When filter need
cleaning or filter damage: Y type filter only take down by any joint, remove filter core, it can be cleaned or change,
welding straignt-through filters that need to be removed, then remove cores, clean or replace, reinstall the product
can be used.
Data Sheet
Available Standard |
SMS,DIN,3A,IDF,RJT, BS, ISO |
Material Quality |
SS304,SS304L,SS316,SS316L |
Size |
1"-4",DN25-DN100,25.4mm-101.6mm |
Available Connection |
Welding ends,triclamp ends,union ends,male ends |
Seal Material |
Silicone, EPDM, Viton, NBR |
Mesh Size&Microns |
3-400mesh&6730-37microns |
Structure |
Staringht type,Angle type,Y type |
Pressure range |
0bar~10bar |
Machine Processing |
The most advanced CNC machine from Japan for processing |
Continuous working temperature |
20°C ~ +135°C (EPDM,Silicone) |
Special Design |
we can produce according to your drawings |
Cartridge Filter housing specificationHere is the specification of the filter housing
Material |
Shell |
SUS304 / SUS316L |
Vent / drain valve |
SUS304 |
Bracket |
SUS304 |
Seal ring |
Silicone, EPDM, PTFE, FKM |
Operation conditions |
Max working pressure |
0.6Mpa , 1.0Mpa |
Max working temperature |
150ºC |
Sterilization method |
In-line sterilization 121ºC, keep 30 minutes |
Surface Finish |
Common methods |
mechanical polishing, electrolytic polishing, Abrasive blasting |
Polishing precision |
Inner wall Ra≤0.3µm Outer surface≤0.4µm |
Connection |
Shell and baseplate |
Tri-clover |
Pressure gauge |
Tri-clamp |
Exhaust valves |
Thread M6 |
Water inlet & outlet |
Tri-clover |
Drainage valve |
Thread M6 |
Cartridges connection |
222 type , 226type |
Mesh to micron conversion chart
U.S MESH |
INCHES |
MICRONS |
MILIMETERS |
3 |
0.2650 |
6730 |
6.730 |
4 |
0.1870 |
4760 |
4.760 |
5 |
0.1570 |
4000 |
4.000 |
6 |
0.1320 |
3360 |
3.360 |
7 |
0.1110 |
2830 |
2.830 |
8 |
0.0937 |
2380 |
2.380 |
10 |
0.0787 |
2000 |
2.000 |
12 |
0.0661 |
1680 |
1.680 |
14 |
0.0555 |
1410 |
1.410 |
16 |
0.0469 |
1190 |
1.190 |
18 |
0.0394 |
1000 |
1.000 |
20 |
0.0331 |
841 |
0.841 |
25 |
0.0280 |
707 |
0.707 |
30 |
0.0232 |
595 |
0.595 |
35 |
0.0197 |
500 |
0.500 |
40 |
0.0165 |
400 |
0.400 |
45 |
0.0138 |
354 |
0.354 |
50 |
0.0117 |
297 |
0.297 |
60 |
0.0098 |
250 |
0.250 |
70 |
0.0083 |
210 |
0.210 |
80 |
0.0070 |
177 |
0.177 |
100 |
0.0059 |
149 |
0.149 |
120 |
0.0049 |
125 |
0.125 |
140 |
0.0041 |
105 |
0.105 |
170 |
0.0035 |
88 |
0.088 |
200 |
0.0029 |
74 |
0.074 |
230 |
0.0024 |
63 |
0.063 |
270 |
0.0021 |
53 |
0.053 |
325 |
0.0017 |
44 |
0.044 |
400 |
0.0015 |
37 |
0.037 |
Advantage of products
1 |
Each kind of products has strong corrosion resistance and over-long service liftime |
2 |
Accessories are easy to be installed |
3 |
Problem-free welding and assembly and highest possible strenghth |
Character
Core of imported or domestic folding decay hole filter assembly, material is qualitative with ptfe, poly alum,
nylon, polypropylene, partial two fluoride and partial four fluorine, etc.;
Connection with 222, 226, two flat head, etc.;
Accuracy: 0.1 mu m, 0.22 mu m, 0.45 mu m, 0.65 mu m, 1 mu mu m and 3 m, 5 microns, 10 microns, 20 microns.
Length: 10 inches, 20 inches, 30 inches
Traffic: 0.5 t/h ~ 25 t/h
Use
This product is our latest developed for cosmetics, perfume and other professional water through freezing of
Liquid clarification filtration; It is ideal equipment for cosmetics factory filter lotion, perfume.
Technical parameters
Model table |
Filter element No. |
Filter element length |
Material of shell |
Filter element interface |
Connect way |
Material of seal |
ACE-WKG |
1 |
5 |
A |
K |
T |
S |
1=1 element |
05=5" |
A=304 |
K-226 |
T= Tri-clamp |
S=Silicone rubber |
|
10=10" |
B=316L |
S=Flat pressing |
F=Flange |
V=Fluorine rubber |
|
20=20" |
|
|
L= Threaded |
F=PTEE |
|
30=30" |
|
|
|
E=EPDM |
Product Size |
Flowrate |
165*460mm |
800L/H |
200*460mm |
1000L/H |
200*530mm |
1500L/H |
250*860mm |
2000L/H |
250*1210mm |
3000L/H |
250*1460mm |
4000L/H |
Feel Free To Contact Us For More Details And Welcome To Visit Our Factory!